1. Define Analysis Name - Save analysis for future use; Recall prior saved analysis. Note: Save/Recall are under development and not available at this time.
| Name | Description | Entry Value(s) | Status | Type | Limits | Comment |
| PreCursors | Pre-cursor values | Real array | Values in dB units. Comma separated list. | |||
| PostCursors | Post-cursor values | Real array | Values in dB units. Comma separated list. | |||
| CursorNorm | Cursor normalization option | Integer | [0,3] |
0 = gain at 0 Hz 1 = sum absolute (tap values) 2 = main tap value 3 = gain at Nyquist frequency |
||
| NormLevel | Normalization level | Real | > 0 | Scalar level | ||
| Poles | LPF pole values | Real array | > 0 | Values in Hz. Comma separated list. |
2. Setup Analysis
| Name | Description | Entry Value(s) | Status | Type | Limits | Comment |
| AnalysisName | Analysis name | String | Alpha-numeric characters or underbar - case sensitive - start with alpha character. | |||
| BitRate | Bit rate | Real | > 0 | Bits per second | ||
| SamplesPerBit | Samples per bit | Integer | >= 4 | |||
| DataType | Data pattern type | Integer | [0,1] |
0 = Pseudo-random sequence (PRBS) 1 = Sequence of N 1's and N 0's (N_1_N_0) |
||
| PRBS_Length | PRBS register length | Integer | [4,8] | Used when Data pattern type = PRBS | ||
| N_Value | N value | Integer | [2,32] | Used when Data pattern type = N_1_N_0 |
3. Run Analysis
| Select to run analysis | Waiting to run |
4. Display Analysis Results
| Display | Action |
| Analysis log file | |
| 1. Spectrum response | |
| 2. Waveform response |